Cone crusher is a new and efficient crusher, which has a high energy efficiency, can have a powerful impact crushing force, crushing capacity advantages, it is loved by consumers. This paper analyzes the structure of energy-crusher.

Cone Crusher

High-energy cone crusher main structure shown in Figure 1, the crusher spindle 3 into the rack 5, the eccentric sleeve 4 sets the spindle 3, a cone crusher mounted on the eccentric sleeve 4, while crushing cone the lower part of the body in a spherical bearing spherical bearing 2 or more, the spherical bearing 2 is fixed to the main shaft 3. Further crusher safety device and adjustment locking mechanism clamor hydraulic, lubrication systems and ordinary cone crusher basically the same.

Structure diagram cone crusher

The high-energy cone crusher working structure mounting cone crusher manganese steel liner moving and installing adjustment with manganese steel liner rings on the rack, the filler cone crusher manganese steel liner and an epoxy resin ( or zinc alloy). Liner is installed on the broken cone has cutting ring and lock nut. Locknuts supporting the distributor plate, the distributor plate with the broken cone rotated so that material into the crushing chamber evenly distributed.

Spindle cone crusher cone-shaped hole into a rack, equipped with a conical gear eccentric sleeve mounted on the spindle, bronze bushings, eccentric sleeve with the bottom of the thrust bearing between the eccentric sleeve and the spindle, thrust bearing cage support, cone crusher set in the eccentric sleeve mounted on the spindle bearing cartridge bowl by bowl pad support the crushing, when the eccentric sleeve rotates, driven by the crushing Rotary crushing motion. As a result of the large diameter spindle, in order to improve the speed of the eccentric sleeve to provide the conditions, the eccentric speed is increased, greatly increasing the crushing impact force, in order to achieve high energy efficiency.

Bowl bearing seal is fitted with grease use sealing ring to achieve, the seal ring compression spring acting in a group of small spiral under dust seal and the body is always kept in contact, so the dust ring into which the pulverized particles are captured and of oil inclusion.

Motor through V-belt to transmit power to the cone crusher, crusher pulley mounted on the shaft via a removable liner.

Crusher lubrication system with thin oil lubrication, the lubricating oil pressure after oil pump lubrication into the crusher. With a circulating water cooling exchanger in diluted oil station. It also has an electric heater, when the oil temperature is below 16 ℃, so that the lubricating oil is heated. For automatic safety protection, equipped with a pressure switch in the lubrication system, the temperature switch and oil flow switch, to ensure that the crusher normal lubrication.

To clean up the crushing chamber or iron accumulation of material, the crusher with a movable hydraulic cavity clearing system. When in use, by the three-way valve, hydraulic oil into the lower portion of the flange is located on the frame uniform hydraulic jack, the bearing sleeve is pushed upward to leave the rack support surface. Other structures are similar to ordinary cone crusher.